Kingston 8GB DDR4 2666Mhz CL19 Desktop Ram (KVR26N19S8/8) Kingston KVR26N19S8/8 Desktop RAM - 8GB Capacity - DDR4 2666MHz - 1.2V Volta

Kingston 8GB DDR4 2666Mhz CL19 Desktop Ram (KVR26N19S8/8)

This document describes ValueRAM's KVR26N19S8/8 is a 1G x 64-bit(8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8,memory module, based on eight 1G x 8-bit FBGA components. TheSPD is programmed to JEDEC standard latency DDR4-2666 timing of19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. Theelectrical and mechanical specifications are as follows

• • Power Supply: VDD=1.2V Typical
• • VDDQ = 1.2V Typical
• • VPP - 2.5V Typical
• • VDDSPD=2.2V to 3.6V
• • Nominal and dynamic on-die termination (ODT) for
•  data, strobe, and mask signals
• • Low-power auto self refresh (LPASR)
• • Data bus inversion (DBI) for data bus
• • On-die VREFDQ generation and calibration
• • Single-rank
• • On-board I2 serial presence-detect (SPD) EEPROM
• • 16 internal banks; 4 groups of 4 banks each
• • Fixed burst chop (BC) of 4 and burst length (BL) of 8
•  via the mode register set (MRS)
• • Selectable BC4 or BL8 on-the-fly (OTF)
• • Fly-by topology
• • Terminated control command and address bus
• • PCB: Height 1.23” (31.25mm)
• • RoHS Compliant and Halogen-Free